040 caches

From: Greg Evans <greg_evans_at_delphi.com>
Date: Fri, 13 Aug 1999 22:02:11 -0400

I'd been noticing recently that my Falcon 040 didn't seem as zippy as it
used to be. Just downloaded Magnus's 040 acc. Well, I noticed that y
instruction cache is turned off even though I run BCACHE40. Here's my
standard auro boot configuration, from XBOOT. Anyone see a problem? This
used to work just fine.
#SET 800x600
  #DATE 130899
  #CACHEOFF
  #INFO1 C:\XBOOT\DESKTOPS\256COLOR.INF
  #INFO2 C:\ASSIGN.NVD
  #COMMAND
    name c:\gdos\nvdidrv1.syx c:\gdos\nvdidrv1.sys
    name c:\gdos\nvdidrv2.syx c:\gdos\nvdidrv2.sys
    name c:\gdos\nvdidrv4.syx c:\gdos\nvdidrv4.sys
    name c:\gdos\nvdidrv8.syx c:\gdos\nvdidrv8.sys
    name c:\gdos\nvdidrvh.syx c:\gdos\nvdidrvh.sys
  #PRG
    68882
    BCACHE40
    BMAPFIX2
    CHK_OFLS
    DRVIN
    EXTENDOS
    FALCON8
    FPATCH2
    GENEVA
    JAR10
    JPEGD
    NEMESIS
    NEOLOAD
    NVDI
    OBURST
    SCC
    TKROMDRV
    UNSQUISH
    WDIALOG
    VIDELITY
    ARTSEVNT
    NEM_LO
    CSHOW
    DMIRROR
    DMASNOOP
    STING
    CLOCKY
    DTCOOKIE
  #ACC
    COPS
    KOBOLD_2
    NEOCNTRL
    NEOQUEUE
    TASKMAN
    S_ARTIST
    AB040ACC
  #CPX
    AB40
    FILEINFO
    NPRNCONF
    NVDICONF
    SERIAL
    STING
    STNGPORT
    STNGPROT
    CLOCKY
#ENDSET


Just for good measure I turned the caches on in TKROMDRV.

Greg
Received on lø. aug. 14 1999 - 15:06:02 CEST