On Sat, 25 Jul 1998, Michael Grove wrote:
> I gave the latest version another try tonight. If I understood the
> German instructions for Falcons with A/B's, I installed hddriver.sys
> on my IDE without a SCSI device identified, then ran hddriver.prg
> from the autofolder just after the A/B tool kit. I don't have wdialog
> installed, nor do I have DMASNOOP installed. I'm using TK 5.07 MiNT
> 1.14 and N_AES 1.1.6, but I get the same results under TOS 4.04.
Have you tried to just install HD-Driver like on any other machine? I
have always done this since 6.30 and it has always worked with my
SCSI-units. 7.50 caused me a lot of trouble though, but that was with
my boot-partition which is on the IDE-drive. My setup is pretty
similar to your, TK5.07, no cache-utilities at all, MiNT + N.AES.
> I would question my N_AES setup or MiNT, but as I have the same
> problem under normal TOS, I must not have the driver configured
> properly or there is something about my machine it dosen't like.
I had similar problems when the XFRB-buffer was installed. This should
always be switched off on AB's.
/*
** Jo Even Skarstein
http://www.stud.ntnu.no/~josk/
**
** beer - maria mckee - atari falcon - babylon 5
*/
Received on lø. juli 25 1998 - 15:55:48 CEST